It is an acrylic copolymer emulsion-based matt interior wall paint that is developed with pigmentation and filling system.


Livecolor Plus is a first class paint with a high coverage, matte and smooth appearance, water-repellent structure that provides economy and quality together.

It integrates with the surface applied. It is capable of breathing. It does not bloat out or go to pieces. Because of its water-based construction, It is environmentally friendly and has no disturbing smell.



Livecolor Plus can be applied on new and smooth inner surfaces, walls and ceilings, as well as old painted interior surfaces that have previously painted and lost its color, glass textile and paintable wall paper made of materials such as satin plaster, paste and primer.



The surfaces on which Livecolor Plus will be applied should be smooth, strong, dry, clean and paintable.

After application of the appropriate primer and all surfaces are cleaned from mold oil, dirt, dust and loose layers, as well as all necessary surface corrections are made, the paint should be done. During the application, ambient and surface temperatures should be between + 5 ° C and + 30 ° C. The product is applied to the surfaces with a brush, roller or single coat spray.

Livecolor Primer or Livecolor Paste Primer should be used on interior surfaces that will be painted for the first time.  When transparent primers are used on such surfaces, the primer can form a glassy layer on the surface as the primer cannot be absorbed by the surface. Due to this glassy surface, the final painting can not hold on to the surface enough and reach enough thickness; so some problems can occur. Livecolor Plus Satin Plaster Primer or 1/7 Concentrated Primer should be used as a single coat without combing and polishing on the surfaces that are old-painted or have strong absorbing power. If pigmented primer is used on such surfaces, painting may have some problems on adherence. It should not be forgotten that a light sanding should be done on all surfaces before the appropriate priming process is applied to the final painting application on softmat-silk-semi-shiny-painted surfaces, or old painted water-based silicone and solvent-based surfaces. Adherence may not be good enough on the surfaces without sanding and without priming with Livecolor Primer or Livecolor Paste Primer. When the application is made according to the labels and legends of the manufacturer company in gypsum, machine gypsum and satin gypsum applications, transparent character primers (Livecolor Satin Plaster Primer or 1/7 Concentrated Primer) should be applied on the surface, which is completed with gypsum process, by taking only one round on the surface without line drawing and polishing. After that, pigmented primers should be used as primer and should be applied as two layers with a roller-brush (just one layer if airless gun is used). Painting should not be  applied directly on lime and loose layers.  Livecolor Plus Satin Plaster Primer or 1/7 Concentrated Primer should be used as a single coat after the lime layer should be cleaned as much as possible by the mechanic methods such as wire brush or spiral motor as well as the dust on the surface is removed. On these types of absorbent surfaces, if pigmented primer is used, there may be adherence problems in paint. Livecolor Plus should be applied as one or two coats on the first layer of Livecolor Closure in order to increase the adhesion strength of the paint on very dirty surfaces (stove, heating wall surfaces) that are not painted for a long time.

 During Airless Injection (Liveplus)

Pressure:   120-140 bar
Angle of the nozzle  50° C
Measure of the nozzle 0.019”
Diluted % 10 in water

It is recommended to use it as two layers by diluting it up to 25% in clean water with brush and/or roller.
Through-dry time ( 20°C, %65 HR)
Touch Dry: 30 - 60 minutes.
Waiting time: 4 - 6 Hours
Last desiccation: 24 Hours (Desiccation time can be varied according to humidity and temperature ratio.
Depending on the type, absorbency and structure of the application surface, 6-10 m² area can be primed by using 1 Liter; 60 - 80 ml/m² . A controlled case study should be done for an accurate consumption.
In its unopened package, it can be stored for 3 years when it can be kept in a cool and dry place, and protected from frost, direct sunlight.
Close the package so as not to that it does not allow it aerify.
15 L, 7.5 L, 2.5 L
XI Irritant
R43 : It can make the skin feel itchy and irritated