Livecolor Primer

Livecolor Primer
It is an acrylic copolymer emulsion-based matt interior and exterior primer that is developed with pigmentation and filling system

SPECIFICATIONS

It can establish new connections between surface and painting, and decrease consumption of the paint. It prevents the disruption of the painting caused by carbonates formed on the newly-formed concrete surface.

 

 APPLY TO:

It is recommended to be used before the first application on mineral-based, absorbent surfaces and before the application on old painted surfaces.

 

 APPLICATION:

Livecolor primer is applied to the facade with a brush, roller or single coat spray.

 

During the application you should control whether the surface temperature is between + 5 ° C and + 30 ° C. Problems on surface should be repaired by using exterior surface paste. Between the primer and each painting application,

 

appr.  6-8 hours should be waited. The setting times must be observed on surfaces such as cement, or plustered surfaces. It is recommended to wait for 4 weeks for the application on newly plastered surfaces. During the application and drying periods, the surface should be protected against  rainfall and frost. Application should not be made under direct sunlight. After the working, equipments need to wash with water. Painting should not be  applied directly on lime and loose layers.

 

Application should be carried on shade areas and it is not recommended to work between 11-16 hours if the weather is more than 30 Celsius.

 

NOTE: On surfaces where there is salt vomiting or risk of salt vomiting, the problem should be solved before application of paint primer.

 

During Airless Injection (Livecolor Primer)

Pressure  140 bar
Angle of the nozzle  50° C
Measure of the nozzle 0.013”
Diluted 5% in water

 

Dilute with clean water at most 10%.

 Through-dry time ( 20°C, %65 HR)

Last layer of paint application: 6-8 hours.

 

 Consumption

Depending on the type, absorbency and structure of the application surface, 7-11 m² area can be primed by using 1 Liter. A controlled case study should be done for an accurate consumption.

 

 STORAGE

In its unopened package, it can be stored for 3 years when it can be kept in a cool and dry place, and protected from frost, direct sunlight.

Close the package so as not to that it does not allow it aerify.

 

 PACKING

15 L, 2.5 L

 

 RISK DEFINITIONS

XI Irritant

 

RISK WARNINGS

R43 : It can make the skin feel itchy and irritated.

© 2014 THERMOLOCK USA, Inc.