CONTACT

It is used for the insulation of all kinds of architectural geometric surfaces, whether oval or plane, in all kinds of old or new houses, buildings, exterior, interior, screed surfaces that need all kinds of insulation, industrial establishments, structures requiring high fire safety (A1-(TSE-ASTM-GOST ...F 240 EFECTIS) food production facilities.

It is traditionally applied on brick, aerated concrete, exposed concrete, pumice block surfaces as well as on old buildings by notching and priming. It can also be applied on board, wood, metal etc. surfaces using different procedures and transition primer.

It is suitable for application in all climatic and geographical conditions. It is an armor that is extremely resistant to high or low temperatures and humidity.

It is easily applied by spraying with a trowel or with machines such as plastering and plastering. Similar to rough, fine classical plaster application, volume is provided first, then the decorative surface is obtained by finishing.

Thermolock has more than enough national and international qualification certificates. Among these, certificates such as TÜV-UTO-CE- ASTM-TSE-GOST-ISO-FAS-LEED come first. In this sense, it has registered and accepted itself as an insulation product both in our country and almost worldwide.

Thermolock products serve the global market. For this reason, it offers different product options ranging from 200 kg/m3 to 600 kg/m3, specially formulated for different geographies with different priorities. Application is made by determining the thickness as a result of the calculation to be made by taking into account the geographical and climatic conditions and the required -U- value. For example, there may be a need to apply 1.5 -2 cm in hot climates and 4 or more in cold climates.

No. Thermolock easily meets the plastering, leveling, insulation and decorative needs of buildings with a single product and single workmanship. Considering all these factors, it is incomparably more economical than its alternatives.

Products are 5-6 times lighter than conventional plaster or screed systems. The specific weight is 200-600 kg/m3 depending on the product type. In this way, it imposes much less weight on buildings than all kinds of classical insulation and leveling systems. It takes load from the building in static. It creates armor against corrosion because it is breathable and water insulated.

Products are produced from natural minerals that provide insulation. Thanks to its strong waterproofing, it does not absorb water. Therefore, it is not affected by frost damage at negative centigrade. With its high diffusion feature, it also makes it possible to evacuate the moisture in the environment. It has excellent resistance to U.V. rays that cause aging especially on exterior facades. The values registered by solar tests conducted in the laboratories of the United States of America are 99%. When such parameters are taken into consideration, it continues to protect itself and provide insulation with its special polymer reinforced hard and strong structure for a lifetime equal to the lifetime of the building.

The products, which are mainly natural minerals used even in soilless agriculture in the food sector, are extremely environmentally friendly and easily recyclable. Our biggest source of pride is that we have the international LEED green product certificate.