Appearance |
White |
Application Temperature |
+5 C°/+35 C° |
Mixture Ratio |
5,5 - 6 L. Water |
Bending Resistance |
4 N/mm2 |
Temperature Strength |
- 30 C° +80 C° |
Flexibility |
Good |
Water Absorption |
30 minutes. 1,7 gr |
Running Hours |
2 Hours |
Shelf Life |
10 months for unopened packages in dry conditions |
PRACTICE DIRECTIONS
- Clean the remnants and moisten the joint gaps that would prohibit clinging.
- Thermolock joint filling is a 20 kg dusted grout bag and should be mixed with 5,6-6 lt of water without leaving any particle. (Low speed mixer can be used for mixing).
- Rest the grout for 10 minutes in order to maturate, mix again before the application.
- Fill the joint gaps with the grout transeversely and take out the excess parts by using a rubber trowel.
- 20-30 minutes later clean the surface with the help of a moist sponge.
- After the surface is dried, clean it with a dry fabric and polish.
- Use and finish the grout within 1 hour after the preparation.
- Throw the expired grout away. Pay attention to the water amount used in the dusted mixture, avoid applying it as syrup. Using as a syrup would cause crackings, collapsing, eroding easily, chalking and discoloration.
- The surface can be used 24-48 hours after the application of grout.
© Copyright 2020 Thermolock, all right reserved.